Tein S-Tech Lowering Springs: Honda Civic 96-00 [SKA24-AUB00]
Lower your Honda Civic (EK Chassis, Hatch, Sedan, Coupe including Si) 1.9 inches in the front and 1.7 inches in the rear.
The TEIN S.TECH Spring is an excellent step towards suspension tuning.
TEIN S.TECH lowering springs are known for their progressive spring rate, incredible ride and handling characteristics and famous green powder coat finish. TEIN makes their S.TECH springs using chrome vanadium construction to ensure these are some of the best quality springs available on the market.
TEIN offers a one year warranty against manufacture defects and sag. TEIN's warranty covers sag more than 5mm, springs breaking and noise.
Can I use TEIN STech's with my stock shocks?
For newer cars, it is ok to use these springs with your stock shocks. For older cars that might have worn shocks, we recommend to replace your shocks at the same time. The S.TECH springs work great with stock shocks, but because they are lower and have higher spring rates than the stock springs, they put extra wear on the shock. If your shock is in good condition, it will be able to handle these lowering springs with no problem.
How is the ride quality with these springs?
TEIN S.TECHs offer one of the better ride qualities of the manufactures due to their progressive spring rates. We have had great experience with customers not only happy over the better handling but also happy with their ride. These springs are extremely comfortable for daily driving.
How does TEIN determine the drop I need?
When TEIN creates the S.TECH springs, they set the drop to close your wheel gap without going too low. There are springs out there that offer a more aggressive drop, but it's usually at the expense of ride quality. Also, since they drop so much, the shock travel is reduced which can hurt the handling characteristics of your car. TEIN sets their S.TECHs to drop it as much as possible to close a good amount of wheel gap, maintain ride quality, and improve handling.
- Spring Rate (Front): 235 lbs/in (4.2 kgf/mm)
- Spring Rate (Rear): 140 lbs/in (2.5 kgf/mm)
Tein S-Tech Lowering Springs Features:
- One year limited warranty
- High-grade material adapted to improve guaranteed satisfaction
- Rubber spring protector sheet to prevent noise (most applications)
- 4 Springs (2 front and 2 rear)
- 2 TEIN Stickers
- Warranty information
- Bump stop guide.